3D Printing: Difference between revisions

Revision as of 10:54, 26 March 2024

3D Printing or additive manufacturing is the process of creating physical 3D objects from a digital model. We use Fused Deposition Modelling printing (FDM) technology for printing 3D models into physical objects. This is available to all students in DBE.

3D printing requires a General Makerspace Induction and 3D Printing badge.

Learn more about Makerspace inductions.

The DBE Makerspace contains 22 3D printers. You can also access 3D printers in the 202 Digital Modelling Workshop.

Specifications

Dimensions

Type	Quantity	Build Volume	No. of Extruders	Resolution	Location
Ultimaker 2+ Connect	10	223 x 220 x 205mm	1	0.06 – 0.2mm	418 Makerspace
Ultimaker S3	11	230 x 190 x 200mm	2	0.06 – 0.8mm	418 Makerspace
Ultimaker S5	1	330 x 240 x 300mm	2	0.06 – 0.8mm	418 Makerspace
Ultimaker 3 Extended	1	215 x 215 x 300mm	2	0.06 – 0.8mm	202 Digital Modelling
Markforged Onyx Pro	1	320 x 132 x 154mm	2	0.1 – 0.2mm	202 Digital Modelling

Materials Available

Material	Description	Available Colours
PLA (polylactic acid)	Good for most 3D print projects. Easy to print, with relatively high strength, low thermal expansion and good adhesion, but low heat resistance	White, pearl white, black, transparent, silver, grey, blue, green, teal, purple, red, orange, yellow
Tough PLA	Similar strength to ABS and heat-resistant to 58°C	White, black
TPU95A (thermoplastic polyurethane)	Flexible, elastic, chemical-resistant filament	Red, black, white
PVA (polyvinyl alcohol)	Water-soluble support material, for specialised applications only	Natural
Carbon fibre filled nylon (Onyx Pro only)	High strength, toughness, and chemical resistance; can be reinforced with continuous fibre to yield aluminum-strength parts. For applications where strength is a requirement, e.g. plastic part replacement, housings, or mounts.	Black

Safe work procedures

Ultimaker 2+ Connect SWP

Ultimaker S-Line SWP

Setting up your files

Check for modelling errors

Common issues with 3D printing occur due to bad geometry, please make sure you check you meshes for the following before handing it to the technician team:

Error Type	What this is?	What does it causes?	How do you fix it?
Non Manifold Geometry	When an objects has edges that are not totally connected or objects with added faces. The object does not have volume.	Doing this causes some or all of the model to have no volume making it impossible to print.	Geometry must be fully enclosed (watertight), and only 2 faces may share an edge.
Non Unified Faces	When an mesh’s faces (normals) are not all facing in the correct direction.	Doing this cases printing software to not understand what is inside or outside the model leading to unexpected results.	Check that your face’s normals are all facing the correct direction.
Support Issues	When there are not enough support structures to print parts of an object in mid-air.	Without supports, your object may fail to print and break apart.	Supports can be added during the printing process but it is also recommended you support anything over a 45 degree angle or to print your object in multiple pieces you glue after printing.

Checklist

Check for Non-Manifold Errors
Check for Naked Edges
Fill/ Cap Holes
Unify Normals
Convert your model to a Mesh
Export your model as a .stl file

Documentation

No content here yet

@@ Line 61: / Line 61: @@
 === Materials Available ===
 {| class="wikitable"
-!Material (click to view SDS)
+!Material
 !Description
 !Available Colours
@@ Line 86: / Line 86: @@
 |}
-== Setting up your Files ==
+== Safe work procedures ==
+[[:File:SWP-Ultimaker Connect 2 plus.pdf|Ultimaker 2+ Connect SWP]]
+[[:File:SWP-Ultimaker S-Line.pdf|Ultimaker S-Line SWP]]
+== Setting up your files ==
 === Check for modelling errors ===
@@ Line 112: / Line 117: @@
 |}
-=== Check list ===
+=== Checklist ===
 # Check for Non-Manifold Errors